suchitav.com

Generations Wireless Technology-ZERO GENERATION TECHNOLOGY (0G – 0.5G)


Wireless telephone started with what you might call 0G if you can remember back that far. The great ancestor is the mobile telephone service that became available just after World War II. In those pre-cell days, you had a mobile operator to set up the calls and there were only a handful of channels available. 0G refers to pre-cell phone mobile telephony technology, such as radio telephones that some had in cars before the advent of cell phones. Mobile radio telephone systems preceded modern cellular mobile telephony technology. Since they were the predecessors of the first generation of cellular telephones, these systems are called 0G (zero generation) systems. Technologies used in 0G systems included PTT (Push to Talk), MTS (Mobile Telephone System), IMTS (Improved Mobile Telephone Service), AMTS (Advanced Mobile Telephone System), OLT (Norwegian for Offentlig Landmobil Telefoni, Public Land Mobile Telephony) and MTD International Journal of Computer Applications (0975 – 8887) (Swedish abbreviation for Mobilelefonisystem D, or Mobile telephony system D). These early mobile telephone systems can be distinguished from earlier closed radiotelephone systems in that they were available as a commercial service that was part of the public switched telephone network, with their own telephone numbers, rather than part of a closed network such as a police radio or taxi dispatch system. These mobile telephones were usually mounted in cars or trucks, though briefcase models were also made. Typically, the transceiver (transmitterreceiver) was mounted in the vehicle trunk and attached to the “head” (dial, display, and handset) mounted near the driver seat. They were sold through WCCs (Wireline Common Carriers, AKA telephone companies), RCCs (Radio Common Carriers), and two-way radio dealers. The primary users were loggers, construction foremen, realtors, and celebrities. They used them for basic voice communication. Early examples for this technology are: 1. The Autoradiopuhelin (ARP) launched in 1971 in Finland as the country’s first public commercial mobile phone network. 2. The B-Netz launched 1972 in Germany as the countries second public commercial mobile phone network (but the first one that did not require human operators anymore to connect calls).

Generations Wireless Technology- FIRST GENERATION TECHNOLOGY (1G)
1G stands for “first generation,” refers to the first generation of wireless telecommunication technology, more popularly known as cellphones. A set of wireless standards developed in the 1980’s, 1G technology replaced 0G technology, which featured mobile radio telephones and such technologies as Mobile Telephone System (MTS), Advanced Mobile Telephone System (AMTS), Improved Mobile Telephone Service (IMTS), and Push to Talk (PTT). Its successor, 2G, which made use of digital signals, 1G wireless networks used analog radio signals. Through 1G, a voice call gets modulated to a higher frequency of about 150MHz and up as it is transmitted between radio towers. This is done using a technique called Frequency-Division Multiple Access (FDMA).
In terms of overall connection quality, 1G compares unfavorably to its successors. It has low capacity, unreliable handoff, poor voice links, and no security at all since voice calls were played back in radio towers, making these calls susceptible to unwanted eavesdropping by third parties. However, 1G did maintain a few advantages over 2G. In comparison to 1G’s analog signals, 2G’s digital signals are very reliant on location and proximity. If a 2G handset made a call far away from a cell tower, the digital signal may not be strong enough to reach it. While a call made from a 1G handset had generally poorer quality than that of a 2G handset, it survived longer distances. This is due to the analog signal having a smooth curve compared to the digital signal, which had a jagged, angular curve. As conditions worsen, the quality of a call made from a 1G handset would gradually worsen, but a call made from a 2G handset would fail completely. Different 1G standards were used in various countries. One such standard is NMT (Nordic Mobile Telephone), used in Nordic countries, Eastern Europe and Russia. Others include AMPS (Advanced Mobile Phone System) used in the United States, TACS (Total Access Communications System) in the United Kingdom, C-Netz in West Germany, Radiocom 2000 in France, and RTMI in Italy.





Related

COMMENT Uncategorized







EDUCATION

INSURANCE


CONTACT
FAVORITE
SITEMAP
VLSI COMPANIES IN BANGALORE
VLSI INTERVIEW QUESTION RFSIR.COM